Blog

How often should Engine Oil Tin Can be changed?

Engine Oil Type and Replacement Cycle 1. Mineral Oil: Recommended replacement every 5000 km or 6 months. This type of oil is cheaper, but its performance and lifespan are relatively shorter. 2. Semi-s

How to properly store paint cans after opening?

Sealing Treatment 1. Immediate Sealing: After use, immediately cover the can opening with plastic wrap and then tighten the lid to reduce air entry. 2. Enhanced Sealing: Add aluminum foil or apply wax

How to determine if a paint can is completely clean?

1. Visual Inspection 1. No Surface Residue After cleaning, the interior of the can should be free of paint lumps, stains, or sticky material. Metal cans should reveal their original color (e.g., silve

How to thoroughly clean discarded paint cans?

I. Preparation before cleaning 1. Safety precautions Wear gloves, goggles, and a mask to avoid contact with residual paint or inhalation of volatile fumes. 2. Tool selection Prepare cleaning agents ba

How to safely dispose of discarded paint cans?

1. Residue Disposal Gas Exhaust For spray paint cans (such as model spray cans), press the nozzle in a well-ventilated area until the gas is exhausted and absorb any remaining liquid with a paper towe

How is an F-Style can repaired and accepted?

I. Pre-Acceptance Preparation ‌1. Defect Inspection and Repair Plan‌ Before repair, a comprehensive quality inspection must be conducted in accordance with the "Key Points for Opening I

How to repair an F-Style can after corrosion?

I. Corrosion Assessment and Surface Treatment ‌1. Corrosion Detection‌ Use an ultrasonic thickness gauge to measure the tank body in a grid pattern, focusing on welds, areas of liquid level

How to determine if an F-Style can is corroded?

‌I. F-Style Can Corrosion Inspection Methods 1. Visual Inspection‌ Use a strong flashlight and a magnifying glass to inspect the interior and exterior walls of the can, focusing on welds, pi

Can F-Style cans be reused after being scrapped?

I. Circumstances Where Reuse is Prohibited 1. Mandatory Scrapping Standards If the can exhibit irreparable defects such as design expiration (usually 10-15 years), severe corrosion (wall thickness red

What to do with F-type tanks after they are scrapped?

I. Confirmation and Filing of Mandatory Scrapping 1. Technical Appraisal A qualified inspection agency (such as the Special Equipment Inspection Center) is commissioned to issue a scrapping technical

What should be done with expired F-Style cans?

I. Mandatory Scrapping Standards 1. Expiration of Design Life If a tank has reached its design life (usually 10-15 years) or has been in use for more than 20 years, it must undergo a comprehensive ins

What is the regular inspection cycle for F-Style cans?

1. Routine Inspection Cycle ‌Initial Inspection‌: Newly commissioned F-Style cans must complete their first regular inspection within three years. ‌Subsequent Inspection Cycles‌: &